Wireless Fire Detection And Alarm System For your Business

adminJuly 18, 2019

0 539 6 minutes read

Wireless Fire Detection And Alarm System For your Business

Wireless Security alarm systems are very important for any business today. Installing wireless fire detection and alarm system has a lot of benefits.

It will ensure your safety as well as the safety of the employees. You just need to choose the right Fire alarm system.

The conventional fire alarm systems are usually used in small sites and buildings. They are also called four-wire systems used in places like cafes and restaurants.

Even though they are cost-effective, they don’t offer minimal disruption and the wires are obviously a hassle. The building has different zones where the fire detectors and alarms are installed.

These zones with their fire detectors and alarms are connected to the control panel, if one goes off the control panel does indicate the zone the alarm is in but you would have to manually find the device.

There are also two-wired fire detectors and alarms that are connected to one single control panel. They are more expensive as there is only one control panel which is more efficient, but they are also faster and easier to install.

The efficiency increases along with versatility and disruption. Thus, there are a lot of fire detectors and alarm systems but Wireless Fire detectors and alarm systems prove to be the best when it comes efficiency and benefits, apart from higher costs.

Wireless fire detection and alarm systems were previously criticized for being unreliable and faulty earlier, but it is not the same case today.

Technology today is far more advanced and not only improvements but a lot of additions and updates have been made to Fire alarm systems.

Table of Contents

What Are Exactly Wireless Fire Detection And Alarm Systems And How Do They Work?

Due to the fire detection and alarm systems being wireless, they work through radio transmitters. The heat or smoke detectors pick up the signals and transmit it from the call points to the control panel. As soon as the call point breaks, the alarm sounds.

Wireless Fire Detection And Alarm System can transmit over a long distance with mesh network which will provide different independent pathways. So if any pathway is interrupted, the devices will use the other pathway.

Thus, through mesh network technology, you can put in installations at large networks.

Due to the technology being advanced, today’s wireless Fire Detection And Alarm System use up-to-date radio technology to work and also prove to be efficient and beneficial due to the very minimal disruption to the interior.

Types of Wireless Fire Detection And Alarm Systems.

Commercial Wireless Fire Detection And Alarm Systems

The major demand at Commercial sites is Wireless Fire Detection And Alarm Systems because it doesn’t disrupt the interior of the building.

These Wireless Fire Detection And Alarm Systems work the same way as traditional ones, except they use they transmit signals to the main fire alarm control panel through wireless frequencies.

Especially for heritage sites, museums and historic sites Wireless Fire Detection And Alarm Systems are very useful because the installation causes no damage.

They are also suited to bulk orders for larger sites such as schools and universities. Wireless Fire Detection And Alarm System are typically more expensive than the traditional ones because they are very hassle-free.

Temporary Wireless Fire Detection And Alarm System

Temporary Wireless Fire Detection And Alarm Systems can usually be found at temporary structures that need this kind of protection such as construction sites.

Know More: Top 8 Upcoming Technology To See in 2019

These Wireless Fire Detection And Alarm System consist of standalone fire alarm stations with extinguishers around the site to help put out the fire faster.

They also have manual call points which when pressed will put on the flashing siren at the site. Usually, there is one main wireless connection to the main control panel, so when one alarm is activated, the signal goes out to all the other devices at the site and sound the alarm.

The control panel can be used manually to switch off the alarm or determine which specific alarm has been triggered. It can also be used to reset the alarm and fire detection system.

Domestic Wireless Fire Detection And Alarm System

Domestic Wireless Fire Detection And Alarm Systems have become a huge demand today because they are efficient and doesn’t disrupt the interior of the house during installation.

The Domestic Fire Detection And Alarm System do not connect to a control panel but rather they connect wirelessly to each other.

It is suitable for big and small houses because if one alarm detects fire, it will transmit a message to other devices and the alarm will go on all of them, giving you time to evacuate and investigate later.

Hybrid Wireless Fire Detection And Alarm System

Hybrid Wireless Fire Detection And Alarm Systems are the new in-demand Fire Detection And Alarm Systems because of their advanced technology.

They allow wireless technology to coexist and work with existing hardwired technology. Thus, there is no hassle of installing them everywhere, but the wireless devices can be installed where necessary.

You can also add devices to an existing alarm system or install a completely new Wireless Fire Detection And Alarm System. Hybrid Wireless Fire Detection And Alarm System allows easy installation of any new devices without the need for new cabling or disruption to the previous system.

Hybrid Wireless Fire Detection And Alarm System can be added in areas where tradition wired Fire Detection And Alarm Systems is inaccessible or impractical.

It may also cause disruption to the interior and aesthetics which is why Hybrid Wireless Fire Detection And Alarm System is better.

This will keep the costs down as Hybrid Wireless Fire Detection And Alarm System gives the flexibility to see where it is needed and to connect to the hardwired devices wherever needed.

Benefits of Wireless Fire Detection And Alarm Systems

There is no hassle of cables and wires thus it is easier to install and work with.
It can be used at temporary work sites such as construction or renovation work because safety is necessary in all cases.
It can be quickly installed and thus does not take away too much of your time.
Wireless fire detection and alarm systems are ideal and perfect for sites that need security and protection and are old like museums or historic sites.
There is no adverse impact on the building interior or material and thus you need not worry about the installation.
It is also good for buildings with more than one story because there is more at stake and it is more difficult to determine cases of fire immediately in tall buildings.

How is a Wireless Fire Detection And Alarm System Beneficial For Your Business?

It does not disrupt your business or disrupt your office environment, instead, it provides better protection.
You don’t need to shut down your office or your working area for the installation to be done.
Due to the fire detection and alarm systems being wireless, you don’t need to worry about it disrupting the interior of your office or making it look ugly.
It can be easily changed or modified as and when the layout of the office changes.
It can also be installed into tall buildings like offices at a very high floor or offices that have very high ceilings.
As they are battery operated, the power going out will not disrupt its functioning. Wireless fire detection and alarm systems will still work efficiently even when the power goes out.

Installation of Wireless fire detection and alarm systems may cost a bit higher than you expect initially but it’s worth the investment. It is quick and doesn’t disrupt your normal everyday office functioning.

Know more: Operating Systems For Ethical Hackers

The installation is fast and hassle-free while also giving you the space to update or modify it in the future. There will be only one condition you will have to be careful about, which is a regular battery replacement for it to work.

The Kind of Businesses That Generally Go For Wireless Fire Detection And Alarm Systems:

Big brands that need maximum security as well as need to look presentable and good as a good interior is very important for them.
Any business that needs hassle free and fast Wireless fire detection and alarm system installation.
Historic sites and buildings such as museums, castles and historic monuments as they need maximum protection for their preservation.
Buildings or offices that have a difficult layout for other fire detection and alarm systems to work such as high ceilings or the office is in a heightened building.
For buildings and sites with more than one story, multiple stories or complex structures such as schools and colleges.
These were certain facts that you need to know before going for Wireless fire detection and alarm systems for your business. It is hard to deny the importance of these systems in any business, thus you should do thorough research and get the best Wireless fire detection and alarm system installed as per your decision.

Author Bio:-

Jacob Wallace works at Addon Technology as a community manager. Addon Technology is a solutions providing company (SITC expert) with an experience of more than 25 years with technical expertise and high-end professionals. Addon is a leading company in Gujarat (India) along with being the most preferred supplier of CCTV Security and Surveillance products, VESDA System, Gate Automation, and Fire Alarm System.